Today’s post is short and sweet and actually a video called “The Making of My Dog Sculpture”.
I created it because I wanted to share with you how much work actually goes into such a sculpture and which steps I took to create it. A sculpture like this takes days to complete.
As inspiration I used a photo of my friends’ dog Hattie, a beautiful rescue they adopted from the charity 4Paws. I saw her on my newsfeed and shared her image with my friends and they were smitten. Hattie is a wonderful dog and very affectionate. We always look forward to see her and go for a walk with her. Here’s a photo of Hattie.
My friends’ dog Hattie
First I created the main body and head separately with Super Sculpey beige, which has a nice buttery feel to it and is used specifically for sculpting. I connected both body parts with a cocktail stick and smoothed over the neck so there is no visible gap.
This took at a least a couple of hours to complete. I paid special attention to the head and added details like eye sockets and brows. For the ears I used a cardboard template I made.
Once this was completed I let it rest overnight.
The second step was to add the fur. I used a tapestry needle for this. Again this took quite a while to complete – about 45 minutes. It’s back breaking work being hunched over such a piece, which is why I often elevate it on a box and work while standing – this means less hunching.
Again I let it rest – especially if I have completed a sculpture late in the day. I let it sit for a while or even overnight.
The third step was – to check it over and maybe add bits I missed and then I baked it for about 2 hours max in my halogen oven.
The fourth step was – priming the whole dog with white Gesso for acrylic paints – the reason behind this is to ensure that the paint that goes over this grips better onto the polymer clay. I let the dog dry before I started painting him.
The fifth step was painting the dog with acrylic paint. I started with white first, let it dry, then the black and added the white bit on the nose. Again this took a while, because I had to let several coats of paint dry and I had to add the paint twice to give the dog good coverage.
The final step was to give the dog two coats of protective varnish – I chose matte for this rather than gloss, apart from the eyes and nose which got a spot of gloss varnish.
And there you have it – my completed dog sculpture.
Thanks for reading and watching. And if you liked this blog post please feel free to share it and comment. 
The post The Making of My Dog Sculpture appeared first on Helenka White Design.